Viewing —

Home / Products

Full manifest

What we source, and how we ship it.

Fin Forming Machines

High-speed roll-forming equipment that stamps aluminum or copper fin stock into corrugated fin profiles for heat exchanger coils. Built for continuous production runs with consistent fin pitch and minimal material waste.

  • MaterialAluminum / copper fin stock
  • Fin Pitch1.2–3.2 mm (adjustable)
  • Line SpeedUp to 120 m/min
  • Material Thickness0.08-0.30 mm
  • Fin WidthUp to 500 mm
  • Control SystemPLC-based automatic control
  • ApplicationsAC coils, refrigeration, radiators

CPJG14*10*350 Fin Forming Machine

A complete high-speed fin forming machine combining a precision forming press, servo-controlled cutting station, automated material discharge feeder, and integrated lubrication system.

Forming Press

Power Supply3-phase: 380V ±10%, 50Hz ±2%
Total Input Power5 kW
Die Table Flatness≤0.03 mm
Fin Size (H×P)12 × 10 mm
Max Fin Width350 mm
Dimensions1240×700×1550mm
Weight1900 kg

Servo Cutting Machine

Cut Width350 mm
Cut-off Frequency0–60 /min
Cutting Height12 mm
Power Supply220V ±10%, 50Hz
Air Source0.5–0.8 MPa
Dimensions650×600×1300mm
Weight155 kg

Material Discharge Machine

Discharge Width350 mm
Discharge Speed0–5000 mm/min
Discharge Frequency0–20 times/min
Coil Inner Hole150 mm
Motor Power0.4 kW
Dimensions900×700×1100mm
Weight105 kg

Lubrication System

Refueling Width0–350 mm
Refueling Frequency0–60 times/min
Refueling Time0–12 sec
Power SupplyDC 24V
Air Source0.5 MPa
Dimensions450×60×300mm
Weight40 kg
Request Quote

FF-100

Compact entry-level fin forming unit, suited for smaller production runs and workshops with limited floor space.

    ...
Request Quote

FF-200

Compact entry-level fin forming unit, suited for smaller production runs and workshops with limited floor space.

    ...
Request Quote

Core Assembly Machines

Automated assembly systems that combine formed fins and tubes into complete heat exchanger cores, ready for brazing. Reduces manual handling, improves assembly efficiency, and ensures better core dimensional consistency.

  • Core Length Range40–700 mm
  • Core Height Range0–1100 mm
  • Tightening Force0–5 T
  • Core TypeFin exchangers cores
  • Assembly WidthUp to 1,500 mm
  • AutomationAutomatic positioning
  • ApplicationsHVAC coils, condensers, evaporators

WOS-HEA700-001 Core Assembly Machine

A precision assembly and tensioning machine for plate-fin heat exchanger cores — manually loaded and fully button-controlled, applying gas-liquid boosted clamping pressure to shape, tighten, and secure the core before packaging.

Operating Conditions

Power SupplyAC220V, 50Hz ±10%
Ambient Temp.-10°C to 70°C
Air Source0.4~0.7 MPa, 30 L/min
Operation ModeContinuous 24h, button-controlled

Core Size Range

Effective Length40~700 mm
Effective Height0~1100 mm
Effective Thickness30~200 mm
Tightening Force0~5 T

Machine Configuration

External Dimensions2200 × 600 × 2600 mm
Fixture DriveStepper motor
Moving Speed0–30 m/min adjustable
ClampingDual gas-liquid booster cylinders

Product Quality

Core Verticality±0.6 mm
Core Diagonal<2 mm (core ≤700×1100)
Length Travel40~700 mm adjustable
Width Stroke30~200 mm adjustable
Request Quote

WOS-HEA500-001

Smaller-format core assembly machine for compact heat exchanger production runs.

    ...
Request Quote

WOS-HEA900-001

Larger-format core assembly machine for extended core dimensions and higher tightening force.

    ...
Request Quote

Cutting Machines

CNC-controlled aluminum cutting systems that saw at any angle with direct servo-fed delivery, built for high-precision, high-throughput profile cutting for demanding applications requiring consistent accuracy.

  • Saw Blade Rangeφ355–φ610 mm
  • Cut Angle35°–145° (any angle)
  • Feed Length6.3 m direct delivery
  • Cutting Thickness01.-3.0 mm
  • Cutting AccuracyUp to ±0.1 mm
  • Cutting SpeedUp to 80 m/min
  • ApplicationsAluminum Extrusion Manufacturing

JR-610 CNC Any-Angle Cutting Machine

CNC aluminum cutting machine that saws at any angle within 35°–145°, with direct servo-fed delivery up to 6.3 meters for continuous, high-precision production.

Cutting Capacity

Saw Blade SizeOuter diameter φ355–φ610 mm, Inner hole: φ30 mm
Max Sawing Height310 mm
Max Sawing Width215 mm
Cut Angle Range35°–145°, tolerance 0–0.15°

Precision & Speed

Verticality±0.15mm (width <100mm)
Spindle Speed3000 RPM (adjustable)
Servo Feed Travel6300 mm (direct feed)
Feed MethodServo feed

Drive & Motors

Main Motor7.5 kW variable frequency
Feed Servo Motor1.3 kW / 1.8 kW Inovance
Angle Servo Motor0.85 kW HuiChuan
Side Push Motor0.75 kW Inovance

Build & Components

Linear Guide RailTaiwan Dinghan
Turnaround SystemTaiwan import dial indicator
BearingsJapanese NSK / NTN
Electrical ComponentsFrench Schneider
Request Quote

JR-505Y Hydraulic Semi-Automated Cutting Machine

Hydraulic semi-automated cross-cutting machine for straight 90° aluminum cuts, suited for simpler production runs.

  • Spindle Motor5.5 kW
  • Voltage380V, 50Hz
  • Main Shaft Speed2900 RPM
  • Saw BladeOD φ355–φ505mm, bore 25.4mm
  • Max Sawing Height155 mm
  • Max Sawing Width420 mm
  • Cut Angle90° fixed
  • Air Compressor5–8 kg/cm²
Request Quote

JR-505Y Hydraulic Semi-Automated Cutting Machine

Hydraulic semi-automated cross-cutting machine for straight 90° aluminum cuts, suited for simpler production runs.

  • Spindle Motor5.5 kW
  • Voltage380V, 50Hz
  • Main Shaft Speed2900 RPM
  • Saw BladeOD φ355–φ505mm, bore 25.4mm
  • Max Sawing Height155 mm
  • Max Sawing Width420 mm
  • Cut Angle90° fixed
  • Air Compressor5–8 kg/cm²
Request Quote

Vacuum Aluminum Brazing Furnace

Single-chamber horizontal vacuum brazing furnace using nickel-chromium strip heating and multi-layer stainless steel insulation, engineered for flux-free aluminum brazing of radiators and other precision components.

  • Effective Workspace3200 × 1200 × 1200 mm
  • Max Loading Capacity3000 kg (incl. tooling)
  • Max Temperature750°C
  • Workpiece MaterialAluminum alloys
  • Maximum temperatureUp to 650°C
  • Vaccum LevelHigh-vaccum controller
  • ApplicationsAuto radiators, aerospace components

VAB-600 Vacuum Aluminum Brazing Furnace

A single-chamber horizontal vacuum furnace with 16 independently controlled heating zones, used for vacuum brazing of intercoolers, oil coolers, radiators, evaporators, condensers, and plate-fin or tube-sheet heat exchangers.

Workspace & Capacity

Effective Workspace3200 × 1200 × 1200 mm
Max Loading Capacity3000 kg (incl. tooling)
Heating Power~600 kW
Max Temperature750°C
Heating RateTo 650°C in <60 min (empty furnace)

Temperature & Vacuum

Working Temperature300–650°C
Temperature Uniformity≤±3°C (at 600°C)
Temp. Control Accuracy≤±1.0°C
Final Vacuum≤6.0×10⁻⁴ Pa
Working Vacuum≤3.0×10⁻³ Pa

Vacuum Pump System

Diffusion Pump2× NHS35, 50,000 L/s (Agilent, USA)
Roots Pump2× BSJ1200LC, 4140 m³/h
Mechanical Pump2× SRV630, 630 m³/h
Maintenance Pump2× DRV40, 40 m³/h

Control System

PLCOmron CP1 series
Temperature ControllerHoneywell HC900, 16-zone independent
Touchscreen15" Wilentong HMI
Vacuum Gauge2× Chengdu Zhenghua ZDF digital
Request Quote

JR-505Y Hydraulic Semi-Automated Cutting Machine

Hydraulic semi-automated cross-cutting machine for straight 90° aluminum cuts, suited for simpler production runs.

  • Spindle Motor5.5 kW
  • Voltage380V, 50Hz
  • Main Shaft Speed2900 RPM
  • Saw BladeOD φ355–φ505mm, bore 25.4mm
  • Max Sawing Height155 mm
  • Max Sawing Width420 mm
  • Cut Angle90° fixed
  • Air Compressor5–8 kg/cm²
Request Quote

JR-505Y Hydraulic Semi-Automated Cutting Machine

Hydraulic semi-automated cross-cutting machine for straight 90° aluminum cuts, suited for simpler production runs.

  • Spindle Motor5.5 kW
  • Voltage380V, 50Hz
  • Main Shaft Speed2900 RPM
  • Saw BladeOD φ355–φ505mm, bore 25.4mm
  • Max Sawing Height155 mm
  • Max Sawing Width420 mm
  • Cut Angle90° fixed
  • Air Compressor5–8 kg/cm²
Request Quote

Shearing Machine

Heavy-duty shearing equipment for cutting sheet metal used in fin stock, casings, and enclosures, built for consistent, high-accuracy straight-line cuts at production volume with reliable precision, durability, and long-term performance.

  • Max Cutting Thickness4 mm
  • Max Cutting Width2500 mm
  • Motor Power5.5 kW
  • Maximum Cutting WidthUp to 2,000 mm
  • Cutting Thickness0.5-4.0 mm
  • Cutting AccuracyUp to ±0.1 mm
  • ApplicationsFin stock, casings, metal panels

QB11-4×2500 Shearing Machine

Standard-type mechanical shearing machine for straight-line cuts of sheet metal up to 2500mm wide, built for consistent, production-volume shearing.

Cutting Capacity

Max Cutting Thickness4 mm
Max Cutting Width2500 mm
Max Material Strength≤450 N/m²

Performance

Max Back Gauge Range500 mm
Strokes per Minute45 strokes/min
Shearing Angle1°50′

Motor

ModelY132S-4
Power5.5 kW
Speed1440 r/min

Dimensions & Weight

Overall Width1500 mm
Overall Height1400 mm
Total Weight3560 kg
Request Quote

JR-505Y Hydraulic Semi-Automated Cutting Machine

Hydraulic semi-automated cross-cutting machine for straight 90° aluminum cuts, suited for simpler production runs.

  • Spindle Motor5.5 kW
  • Voltage380V, 50Hz
  • Main Shaft Speed2900 RPM
  • Saw BladeOD φ355–φ505mm, bore 25.4mm
  • Max Sawing Height155 mm
  • Max Sawing Width420 mm
  • Cut Angle90° fixed
  • Air Compressor5–8 kg/cm²
Request Quote

JR-505Y Hydraulic Semi-Automated Cutting Machine

Hydraulic semi-automated cross-cutting machine for straight 90° aluminum cuts, suited for simpler production runs.

  • Spindle Motor5.5 kW
  • Voltage380V, 50Hz
  • Main Shaft Speed2900 RPM
  • Saw BladeOD φ355–φ505mm, bore 25.4mm
  • Max Sawing Height155 mm
  • Max Sawing Width420 mm
  • Cut Angle90° fixed
  • Air Compressor5–8 kg/cm²
Request Quote

Cleaning Machine

Automated cleaning equipment for aluminum heat exchanger components, removing oil, dust, particles, and residues before brazing or assembly, improving cleanliness, consistency, and production efficiency.

  • Cleaning MethodAutomatic spray cleaning
  • Cleaning MediumAqueous cleaning solution
  • Workpiece MaterialAluminum components
  • Cleaning Temperature40–80°C
  • Drying SystemHot-air circulation drying
  • AutomationAutomatic conveying and cleaning
  • ApplicationsRadiators, condensers, heat exchangers

Automatic Enclosed Heat Exchanger Cleaning Machine

Fully enclosed automatic cleaning system for aluminum heat exchanger components, integrating washing, rinsing, drying, and material transfer for stable cleaning performance in continuous production environments.

Cleaning Capacity

Cleaning MethodMulti-stage spray cleaning
Cleaning CapacityUp to 50 pcs/h
Cleaning Pressure2–5 MPa

Washing & Drying

Cleaning Temperature40–80°C
Rinsing SystemIntegrated water rinsing
Drying MethodHot-air circulation

Control & Power

Control SystemPLC automatic control
Total PowerApprox. 45 kW
Voltage380V, 50Hz
Heating PowerApprox. 18 kW

Dimensions & Weight

Overall LengthApprox. 12,000 mm
Overall WidthApprox. 2,500 mm
Overall HeightApprox. 2,800 mm
Total WeightApprox. 6,000 kg
Request Quote

Automatic Spray Cleaning Machine

Automated spray cleaning system for aluminum heat exchanger components, designed for efficient surface cleaning and preparation before assembly or brazing.

  • Cleaning MethodMulti-stage spray cleaning
  • Voltage380V, 50Hz
  • Total PowerApprox. 35 kW
  • Cleaning Pressure2–5 MPa
  • Cleaning Temperature40–80°C
  • Drying SystemHot-air circulation
  • Conveyor Speed1–5 m/min
  • ApplicationHeat exchanger components
Request Quote

Continuous Industrial Parts Cleaning Machine

Continuous enclosed cleaning equipment for production-line applications, providing controlled washing, rinsing, and drying of aluminum components with reduced manual handling.

  • Cleaning MethodMulti-stage spray cleaning
  • Voltage380V, 50Hz
  • Total PowerApprox. 50 kW
  • Processing CapacityUp to 60 pcs/h
  • Cleaning Temperature40–80°C
  • Drying SystemHot-air circulation
  • Transfer SystemAutomatic conveyor
  • ApplicationRadiators, condensers, heat exchangers
Request Quote

Trade terms

Shipment specification

BHT

Commercial terms are confirmed according to product, destination, and order requirements.

01
Incoterms
FOB, CIF, DDP Other terms on request.
02
Payment
T/T, L/C Confirm with your account manager.
03
MOQ
Varies by category Ask for specific figures.
04
Lead time
25–45 days production Plus transit time.
BHT

International sourcing and delivery terms are confirmed with your account manager.

COMMERCIAL TERMS

Don't see your product listed?

Send Your Spec Sheet